B.U.D.S. (BRP Utility and Diagnostic Software) is a comprehensive diagnostic software. Megatech - is a license of the BUDS software developers. This license is not available for BRP dealers and distributors
B.U.D.S. (BRP Utility and Diagnostic Software) is a comprehensive diagnostic software.
DIUS MPI-3 adapter can be used for diagnostic of all 4-TEC/E-TEC BRP vehicles 2002 and newest:
PWC and Sport Boats SeaDoo.
Snowmobiles Skidoo and Lynx.
All Can Am vehicles (ATV, SSV, Roadster Spyder).
In 2012, the new equipment “T-harness cable” (p/n 529035869) was released to power the Skidoo/Lynx electronic modules while the BUDS software is running.
T-harness cable was designed to work with the MPI interface.
On September 2017 BRP distributed the Bulletins for All types of Vehicles where is said that “BRP strongly recommends the use of the power interface and power supply cables to stabilize the unit voltage when using BUDS1 / BUDS2 during software updates Vehicle”.
This “Power Interface Kit” is an upgraded version and replaces the T-harness cable.
Power Interface Kit includes:
Power Interface (p/n 515177223)
12 V Battery Supply Cable (p/n 529035997)
The power interface and power supply cable allows the connection of a fully charged external battery to provide stable voltage to the unit and BUDS/ BUDS2. Stable voltage is essential to prevent update crashes.
DO NOT use a charger on the battery (unit or external) during software updates.
The power interface and power supply cable connected to external battery can be used for extended diagnostic time.
The power interface with or without the power supply cable will keep the unit powered even if the ignition switch is turned off or the DESS key is removed.
The power interface has a fuse protected voltmeter included and an extra fuse to protect from polarity inversion of the power supply cable.
DESS POST 4-tec Interface
BRP 4-TEC DESS POST Interface is designed ONLY for adding/removing DESS keys on 4-TEC models of SeaDoo and Skidoo vehicles (with SIEMENS ECU, from 2005 to 2011)
DIUS 4-in 1 ECM/Cluster + Dess 4tec + Power Interface + MPI-3 (kit)
MPI-3 adapter for diagnosing all 4-TEC / E-TEC BRP 2002-2023 and newer vehicles.
DESS 4-TEC/E-TEC Interface. Is designed for add/erase DESS keys for 4-TEC/E-TEC models.
Power Interface (analog of BRP p/n 515177223) – unit voltage stability during software updates. The 12 V Battery...
B.U.D.S. (BRP Utility and Diagnostic Software) is a comprehensive diagnostic software.
DIUS MPI-3 adapter can be used for diagnostic of all 4-TEC/E-TEC BRP vehicles 2002 and newest:
PWC and Sport Boats SeaDoo.
Snowmobiles Skidoo and Lynx.
All Can Am vehicles (ATV, SSV, Roadster Spyder).
B.U.D.S. (BRP Utility and Diagnostic Software) is a comprehensive diagnostic software.
MPI-3 adapter can be used for diagnostic of all 4-TEC/E-TEC BRP vehicles 2002 and newest:
PWC and Sport Boats SeaDoo.
Snowmobiles Skidoo and Lynx.
All Can Am vehicles (ATV, SSV, Roadster Spyder).
Interface 2-in-1 DIUS– must be used in conjunction with MPI-2 or MPI-3
In this one device, we have combined three:
1. Power Interface (analog of BRP p/n 515177223) – unit voltage stability during software updates. The 12 V Battery Power Supply Cable (analog of BRP p/n 529035997) is included.
2. ECM/Cluster Connection Interface (ECCI) is...
B.U.D.S. (BRP Utility and Diagnostic Software) is a comprehensive diagnostic software.
PWC and Boats SeaDoo.
Snowmobiles Skidoo and Lynx.
All Can Am vehicles (ATV, SSV, Roadster Spyder).
